Fine woven bracelet with Coral and Turquoise Howlite

This bracelet  was completed using 2- 7" pieces of 14 ga. Half round Sterling silver wire (S.S.).(hammer on the round side only)
4 - 6 1/2" pieces of 18 fa. Round wire
These pieces were then taped together at one end and put in a vise to do the weave.
The weave wire was 30ga. S. S.  Very fine wire.
Then I also used 2- 1" pieces of 16 ga. Round and torched each end to make a ball on either side to use as my pin to attach each wire and closure to.
After I finished my weave, I turned both ends of all four wires forming into an open loop, to be put around the pins.
Then the hinge was formed and added.
Then the outer hammered wires were added.
Then the design using wire and stone and sterling beads were added.